|
Pack size A pack of 1 magnet
Geometry 23mm dia x 20mm thick with a 6mm hole through the centre.
The NORTH pole is on one 23mm dia face and the SOUTH pole is on the opposite face.
The NORTH and SOUTH poles are 20mm apart. Plating
These magnets are plated with 3 layers of protective coatings - Nickel + Copper + Nickel (Ni-Cu-Ni) Performance These magnets will have approximately 5,900 Gauss on each face.
Each magnet can support a steel weight of up to 30 kgs Extreme Power Warning!! These magnets are dangerous! If your fingers are trapped between two of these magnets, they will cut the skin.
These magnets should only be handled with great care. Maximum Operating temperature
90 degrees C Fixing They can be bonded using 2 part adhesives such as 'Araldite'
 |
